ZyXEL Communications ZyWall 110 Initial Setup

1/9
www.zyxel.com
ZLD Initial Setup (4.25 Firmware)
This guide will provide initial setup instructions to get the ZyWALL/USG connected to
the internet.
Supported Devices
ZyWALL 110 – Firmware version 4.25 and newer
ZyWALL 310 – Firmware version 4.25 and newer
ZyWALL 1100 – Firmware version 4.25 and newer
USG40 – Firmware version 4.25 and newer
USG40W – Firmware version 4.25 and newer
USG60 – Firmware version 4.25 and newer
USG60W – Firmware version 4.25 and newer
USG110 – Firmware version 4.25 and newer
USG210 – Firmware version 4.25 and newer
USG310 – Firmware version 4.25 and newer
USG1100 – Firmware version 4.25 and newer
USG1900 – Firmware version 4.25 and newer
USG20-VPN – Firmware version 4.25 and newer
USG20W-VPN – Firmware version 4.25 and newer
Scenario
This guide covers first time setup for internet access on ZyWALL (ZLD)
routers.

ZyXEL Communications ZyWall 110 Specifications

General

Safety	LVD (EN60950-1), BSMI
Maximum data transfer rate	1000 Mbit/s
Electromagnetic compatibility	FCC Part 15 (Class B), CE EMC (Class B), C-Tick (Class B), BSMI
Number of users	25 user(s)
VPN tunnels quantity	100
USB 2.0 ports quantity	2
Connectivity technology	Wired
Ethernet LAN (RJ-45) ports	8
Input current	3.33 A
Mean time between failures (MTBF)	787.1093 h
Storage temperature (T-T)	-30 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Weight	2000 g
Dimensions (WxDxH)	300 x 178 x 44 mm