ZyXEL Communications ZyWALL 1100 Initial Setup

1/9
www.zyxel.com
ZLD Initial Setup (4.25 Firmware)
This guide will provide initial setup instructions to get the ZyWALL/USG connected to
the internet.
Supported Devices
ZyWALL 110 – Firmware version 4.25 and newer
ZyWALL 310 – Firmware version 4.25 and newer
ZyWALL 1100 – Firmware version 4.25 and newer
USG40 – Firmware version 4.25 and newer
USG40W – Firmware version 4.25 and newer
USG60 – Firmware version 4.25 and newer
USG60W – Firmware version 4.25 and newer
USG110 – Firmware version 4.25 and newer
USG210 – Firmware version 4.25 and newer
USG310 – Firmware version 4.25 and newer
USG1100 – Firmware version 4.25 and newer
USG1900 – Firmware version 4.25 and newer
USG20-VPN – Firmware version 4.25 and newer
USG20W-VPN – Firmware version 4.25 and newer
Scenario
This guide covers first time setup for internet access on ZyWALL (ZLD)
routers.

ZyXEL Communications ZyWALL 1100 Specifications

General

SFP ports	2
Redundant power supply	Optional
IPS Throughput	1.5 Gbps
Antivirus Throughput	800 Mbps
Humidity	10% to 90% (non-condensing)
Interfaces	8 x 10/100/1000 Mbps
Console port	1 x RJ-45
USB ports	2 x USB
Power supply	100-240V AC
Operating Temperature	0 to 40 °C
Storage Temperature	70°C