1) Add a new argument "mss" to configure the MSS value.
2) After finishing the configuration, the interface information will be displayed.
Usage: ip ifconfig [iface] [ipaddr</mask bits>] <broadcast [addr]> <mtu [value]>
<mss [value]> <dynamic> <showoff>
Ex: ip ifconfig enif1 192.168.70.222/24 broadcast 192.168.70.250 mtu 1500 mss
1460.
19. [BUG FIX]
Symptom: The packet will be dropped if the device does not have the ARP entry
of the receiver of this packet.
Condition:
1) Clear ARP table by "CI>ip arp flush".
2) Send a ping to 168.95.1.1, but the PC will not get a response in the first ICMP
Echo Request.
3) After the first ping, the rest of pings can get responses.
Modifications in V 4.01(XU.0)b1 | 08/08/2006
1. Based on V4.00(XU.2)C0, first release.
Main changes:
1) add DMZ/WLAN zone interface
2) upgrade concurrent active vpn tunnel number to 5 (originally 2)
3) upgrade port forwarding entry number to 20
4) add Firewall/BWM/CF/NAT over IPSec
5) add 4.01 uniform home page
6) add TR069 enhancement
To Next Page
Loading...
