ZyXEL Communications ZyWALL 2 Plus - Page 10

can set Start port to End port on ZW5.
6) SMT WLAN Zone is different
11. [BUG FIX] 060817054
Symptom: ZW2 Plus V4.01(XU.0)b1 behind the zywall 35 (V4.01) ip alias, VPN
tunnel can not work.
Topology:
pc1---(L)zw2-1(W)---(L)zw35(L)---(W)zw2-2(L)---pc2
zw35 lan ip:
ip alias1:10.10.10.1
ip alias2:172.172.172.1
zw2-1 wan ip:10.10.10.200 (bridge mode)
pc1 ip:10.10.10.100
zw2-2 wan ip:172.172.172.200 (route mode)
pc2 ip:192.168.1.33
Condition:
1) Create a VPN rule on zw2-1 and zw2-2.
2) Pc1 ping pc2 and triggered this VPN rule.
3) VPN tunnel will be connected but pc1 ping or ftp to pc2 fail.
12. [ENHANCEMENT]
Add ci command for WAN port Ethernet speed. Steps are the following:
1) ether edit load
2) load <ether no(1:lan).>
3) ether edit load 2
4) ether edit speed (speed <auto|10/half|10/full|100/half|100/full>)
5) ether edit speed auto
6) ether edit save
13. [ENHANCEMENT]
Microsoft cryptographic library supports only odd-sized keys for generating the
RSA-modulus.
Let the key number of creator primes be odd-size.
14. [BUG FIX]
Symptom: Import certificate fail.
Condition:
1) Goto eWC>SECURITY>CERTIFICATES>My Certificates page, export the
ZyWALL's self-signed auto_generated_self_signed_cert certificate in PKCS#12
format.
2) Import the same certificate file to ZyWALL. The ZyWALL will show the
error message "The certificate name cannot be blank".
15. [ENHANCEMENT]
Add PKCS12 for ZyNOS.
16. [ENHANCEMENT]
Add second time schedule setting in content filtering.
17. [BUG FIX]
Symptom: Device crashes because of memory double free in Content Filter.
Condition:
1) Enable Content Filter and Web site customization.
2) After a while, the device will crash sometimes.
18. [ENHANCEMENT]
Enhance the CI command "ip ifconfig".