run that script show "XSS Vulnerability" message box. This is like as XSS
vulnerability issue.
Note: Step 4 is decided by administrator. Currently it is not controlled.
6. [BUG FIX] 060811833
Symptom: Message to display when a site is blocked failed but there are web sites
blocked log on log page.
Condition:
1) Register and enable content filter.
2) On Message to display when a site is blocked, edit Denied Access Message to
kkkkkkkkkk and Redirect URL to tw.yahoo.com.
3) On Categories, Select All Categories.
4) Open www.gamble.com on PC and the website can't be opened. There is no
blocked message appeared and don't redirect website to tw.yahoo.com.
5) There is a web site blocked log on log page showed
"www.gameble.com:Gambling 192.168.1.33:4368 198.173.81.173:80 WEB
BLOCK"
7. [BUG FIX] 060814876
Symptom: CERTIFICATES log url page can not found.
Condition:
1) CERTIFICATES error log like as "2006-08-14 15:59:43 Due to error code(10),
cert noRecv:[ID][CER][SIG][NOTFY:INIT_CONT567A6AFE CERT
MANAGER", the url at "code(10)".
2) Click this url will be redirect to http://DUT IP/h_Certificate_Code.html, but
this page can not found.
8. [BUG FIX] 060814878
Symptom: Bridge mode VPN "Adjust TCP Maximum Segment Size" can not
work.
Condition:
1) DUT1 in bridge mode, create a VPN1 rule.
2) VPN Global Setting Adjust TCP Maximum Segment Size=1000.
3) DUT2 in router mode, Create a VPN2 rule.
4) Ftp from DUT2 PC2 (ftp client) to DUT1 PC1 (ftp server).
5) Sniffer package, always show ftp data size is 536 bytes.
9. [BUG FIX] 060815943
Symptom: Bandwidth Management's Number of classes can not add to 10 rules.
Condition:
1) Bandwidth Management's Number of classes can not add to 10 rules, it just can
add 9 rules.
2) And then edit anyone rule click apply, GUI will be show message of "Number
of classes reaches the upper bound" and can not save rule.
10. [BUG FIX] 060817043
Symptom: The difference between ZW5/35/70 v4.01 and ZW2 Plus
Condition:
1) LAN/DMZ/WAN/Windows Networking(NetBIOS over TCP/IP)
2) LAN/DMZ/Static DHCP: MAC format is 00:00:00:00:00:01, ZW5:
000000000001
3) Firewall/Service/Custom Service, ZW2 Plus no default settings.
4) VPN/Global Setting, VPN rules skip applying to the overlap range of local and
remote IP addresses default is disable on ZW5.
5) BWM/Edit Class/ Filter Configuration/Custom/Destination Port &Source Port
To Next Page
Loading...
