attack
[0:none/1:log/2:alert/3:both]
R + B record and alert the firewall attack logs
display R + B display the category setting
error [0:none/1:log/2:alert/3:both] R + B record and alert the system error logs
ipsec
[0:none/1:log/2:alert/3:both]
R record the access control logs
ike [0:none/1:log/2:alert/3:both] R record the access control logs
javablocked [0:none/1:log] R + B record the java etc. blocked logs
mten [0:none/1:log] R + B record the system maintenance logs
packetfilter [0:none/1:log] R + B record the packet filter logs
pki [0:none/1:log/2:alert/3:both] R record the pki logs
tcpreset [0:none/1:log] R + B record the tcp reset logs
upnp [0:none/1:log] R record upnp logs
urlblocked
[0:none/1:log/2:alert/3:both]
R + B record and alert the web blocked logs
urlforward [0:none/1:log] R + B record web forward logs
clear R + B clear log
display [access|attack|error|ipsec|ike|javab
locked|mten|packetfilter|pki|tcpre
set|urlblocked|urlforward]
R + B display all logs or specify category logs
errlog R + B
clear R + B display log error
disp R + B clear log error
online R + B turn on/off error log online display
load R + B load the log setting buffer
mail R + B
alertAddr [mail address] R + B send alerts to this mail address
display R + B display mail setting
logAddr [mail address] R + B send logs to this mail address
schedule display R + B display mail schedule
schedule hour [0-23] R + B hour time to send the logs
schedule minute [0-59] R + B minute time to send the logs
schedule policy
[0:full/1:hourly/2:daily/3:weekly/
4:none]
R + B
mail schedule policy
schedule week
[0:sun/1:mon/2:tue/3:wed/4:thu/5
:fri/6:sat]
R + B
weekly time to send the logs
server [domainName/IP] R + B mail server to send the logs
subject [mail subject] R + B mail subject
save R + B save the log setting buffer
syslog R + B
active [0:no/1:yes] R + B active to enable unix syslog
display R + B display syslog setting
facility [Local ID(1-7)] R + B log the messages to different files
server [domainName/IP] R + B syslog server to send the logs
updateSvrIP <minute> R + B
If there is one parameter <minute>, it will
change the dns timer task timeout value.
Otherwise, do dns resolve to find email log
server and syslog server IP.
consolidate R + B
switch <0:on|1:off> R + B active to enable log consolidation
period R + B consolidation period (seconds)
msglist R + B display the consolidated messages
switch
bmlog <0:no|1:yes> R + B active to enable broadcast/multicast log
display R + B display switch setting
trilog <0:no|1:yes> R + B active to enable triangle route log
To Next Page
Loading...
