ZyXEL Communications ZyWALL 2 Plus - Page 5

10. Some pre-define custom service can’t add to firewall rule when configure from
Vantage. For example: AX.25, IPv6, VNC, NTP and so on.
11. The “Mail Sender” field on device/Log settings page hasn’t implement on Vantage
side.
12. [Symptom] Mbuf double free when add firewall rules by using CI commands.
[Condition]
(1). On SMT 24.8, configure firewall rules by using CI commands.
(2). Add DMZ to LAN rule and DUT crashed.
(3). It couldn't be reproduced.
13. [Symptom] Test Bandwidth Manager a period of time, PPTP will be dropped and
reconnected.
[Condition]
PC--- (Lan) DUT (PPTP) ---- PQA lab (192.168.10.X)
(1). Set Encapsulation = PPTP.
(2). Edit web eWC/Firewall/Rule Summary，Packet Direction=WAN to LAN，edit
rule 1，Selected Service(s) = *H.323 (TCP：1720)
(3). Edit web eWC/NAT/Port Forwarding，WAN Interface=WAN1，
index1/Active=enable，Name=H323，Incoming Port(s)=1720-1720，Server IP
Address=192.168.1.33
(4). Edit web eWC/BW MGMT，WAN1/Active=enable，WAN1/Speed
(kbps)=1000，Scheduler=Fairness-Based
(5). Edit web eWC/BW MGMT/Class Setup，Interface=WAN，Add Sub-Class，
Class Name=Custom，Bandwidth Budget=200，Priority=2，Enable Bandwidth
Filter= enable，Service= Custom.
(6). Edit web eWC/BW MGMT/Class Setup，Interface=WAN，Add Sub-Class，
Class Name=FTP，Bandwidth Budget=200，Priority=3，Enable Bandwidth Filter=
enable.
(7). Edit web eWC/BW MGMT/Class Setup，Interface=WAN，Add Sub-Class，
Class Name=H323，Bandwidth Budget=200，Priority=5，Enable Bandwidth
Filter=enable，Service=H.323
(8). Edit web eWC/BW MGMT/Class Setup，Interface=WAN，Add Sub-Class，
Class Name=SIP，Bandwidth Budget=200，Priority=7，Enable Bandwidth
Filter=enable，Service=SIP
(9). Edit web eWC/BW MGMT/Class Setup，Interface=WAN1，move filter 4 to
filter 1.
(10). Edit web eWC/BW MGMT/Class Setup，Interface=WAN1，move filter 4 to
filter 2.
(11). Edit web eWC/BW MGMT/Class Setup，Interface=WAN1，move filter 4 to
filter 3.
(12). FTP upload file from 192.168.1.33 to PQA lab.
(13). Use “TfGen” application to send UDP packet/ 500kbps from 192.168.1.33 to
PQA Lab.
(14). Call Netmeeting (OpenH323) from 192.168.1.34 to 192.168.10.101 and send
voice packet.
(15). Make a SIP phone call from 192.168.1.33 to 192.168.10.100 and send voice
packet.
(16).After a period of time, PPTP will be dropped and reconnected.