ZyWALL 35 Support Notes
All contents copyright (c) 2006 ZyXEL Communications Corporation.
75
10) Click on the icon to add a new “Network Policy” over the configured Gateway Policy.
11) Activate the profile and name this policy as “PC1-to-Dept1” in this example. Enable “Nailed-Up”
option if you need the functionality that will automatically re-initiate a tunnel to a configured peer in
the event of SA Lifetime expires, failure on the link.
12) This network policy “PC1-to-Dept1” will be mapped to Gateway Policy, “Static Public IP Address”
by default. If you need to change to other pre-defined Gateway Policy, you can select from the
drop-down list.
13) Under “Local Network”, choose “Subnet” and input “192.168.71.0” and “255.255.255.0” for Dept1 in
this example.
To Next Page
Loading...
