ZyWALL 35 Support Notes
All contents copyright (c) 2006 ZyXEL Communications Corporation.
76
14) Under “Remote Network”, choose “Single” and input “192.168.1.101” for PC1 in this example.
15) Under “IPSec Proposal”, select the Encryption and Authentication Algorithm. Note the configuration
must be consist on both ZyWALLs (GW1 & GW2)
16) Click on “Apply” to save profile
17) The new Network Policy, PC1-to-Dept1 is added to the Gateway Policy.
To Next Page
Loading...
