ZyWALL 5 Internet Security Appliance
8
3.1 Accessing Your ZyWALL Via Web Configurator
1. Launch your web browser. When your ZyWALL is in router mode, enter “192.168.1.1” (default)
as the web site address. If you set the ZyWALL to bridge mode, use the IP address you
configured to access it.
2. The default password (“1234”) is already in the password field (in non-readable format). Click
Login to proceed to a screen asking you to change your password. Click Reset to revert to the
default password in the password field.
3. It is highly recommended you change the default password! Enter a new password, retype it to
confirm and click Apply; alternatively click Ignore if you do not want to change the password
now.
4. Click Apply in the Replace Certificate screen to create a certificate using your ZyWALL’s
MAC address that will be specific to this device.
Change default password.
Default password.
Web site address.
To Next Page
Loading...
