ZyWALL 5 Support Notes
All contents copyright (c) 2006 ZyXEL Communications Corporation.
250
Step 5. After configuring CNM remote management on device, ZyWALL will start to register itself to
configured Vantage CNM server. After exchanging the configuration between ZyWALL and Vantage
CNM, the Registration Status will change to “Registered”. At this moment, the configuration is
synchronized on both device and Vantage CNM.
On Vantage CNM, the device icon will turn green and the device status will change to “On” and the WAN
IP of the device will be shown on the content screen.
To Next Page
Loading...
