ZyXEL Communications ZyWALL USG 100 Series

To Next Page

To Previous Page

ENGLISH

6 Default Settings and Port Details

The ZyWALL is configured for the following network topology by default. (ZyWALL USG 200)

ZyWALL USG 200

Port Interface Zone IP Address and DHCP Settings Suggested Use With Default Settings

P1, P2 wan1,

wan2

WAN DHCP clients Connections to the Internet

P3 opt OPT None, DHCP server disabled Third WAN, additional LAN, WLAN, or

DMZ port or a separate network.

P4, P5 lan1 LAN1 192.168.1.1, DHCP server enabled Protected LAN

P6 ext-wlan WLAN 10.59.0.1, DHCP server enabled Wireless access points

P7 dmz DMZ 192.168.3.1, DHCP server disabled Public servers (such as web, e-mail and

FTP)

AUX aux None None Auxiliary modem

CONSOLE n/a None None Local management

ZyXEL Communications ZyWALL USG 100 Series - Page 6