ZyXEL Communications ZYWALL USG 20 - Page 6

ZyXEL – ZyWALL USG Support Notes
All contents copyright (c) 2010 ZyXEL Communications Corporation.
6
Step 2. Fill in the PPPoE user name and password.
Step 3. Click CONFIGURATION > Network > Interface > PPP to open the
configuration page. User can click the system default rule and edit it.
Step 2. Fill in the PPPoE parameters:
- Select PPP over Ethernet encapsulation mode
- User name
- Password
Step 3. Click the Apply button to save and apply the setting.