ZyXEL Communications ZYWALL USG 20 - Configuration Guide

ZyXEL – ZyWALL USG Support Notes
All contents copyright (c) 2010 ZyXEL Communications Corporation.
5
1.2 Configuration Guide
Network Conditions:
USG-50:
- WAN1_PPP: PPP over Ethernet
- Cellular1: 3G
ZyWALL-5 UTM:
- WAN1: PPP over Ethernet
- WAN2: 3G
Goal to achieve:
Use the PPPoE interface as device’s primary WAN connection and switch to the 3G interface automatically when the PPPoE interface’s connection fails.
ZLD configuration
ZyNOS configuration
Step 1. Click CONFIGURATION > Object > ISP Account to create an ISP
account first.
Step 1. Click Network > WAN > WAN1 to open the configuration screen.