Step 2. Go to Configuration > Object > Schedule. Add one recurring schedule
object.
Input Start Time and Stop Time, and choose the weekdays.
Step 2. Go to ADVANCED > BW MGMT > Class Setup. Choose WAN1 to
configure upload bandwidth management. Add a Sub-Class.
Bandwidth Budget: Allocate 100kbps for the manager’s http upload traffic.
Priority: Assign the highest priority 7.
Enable Borrow bandwidth from parent class.
Enable Bandwidth Filter
Service: choose Custom
Destination Address: Any
Destination Port: 80(HTTP)
Source Address: manager’s IP 192.168.1.50
Source Port: Any
Protocol ID: 6(TCP)
To Next Page
Loading...
