Chapter 33 DHCP
ES-4124 User’s Guide
268
33.5 Configuring DHCP VLAN Settings
Use this screen to configure your DHCP settings based on the VLAN domain of the DHCP
clients. Click IP Application > DHCP in the navigation panel, then click the VLAN link In
the DHCP Status screen that displays.
" You must set up a management IP address for each VLAN that you want to
configure DHCP settings for on the Switch. See Section 7.6 on page 81 for
information on how to do this.
Figure 150 IP Application > DHCP > VLAN
To Next Page
Loading...
