11
Contact your local waste disposal authority for instructions on how to dispose of used batteries. Used
batteries can be harmful to the environment, and should not be thrown out with household rubbish.
AC Adapter
The main unit receiver can operate with a 6.0V AC/DC adapter, which can be purchased separately.
Mounting the Remote Monitor
The Remote Monitor can either be placed on a flat surface with the back stand pulled out or mounted as
shown below:
Diagram
Instructions
1. Mount by using nails or screws.
2. Hammer in nail or screw halfway.
3. Attach main unit
Mounting the Sender Box
The Sender Box should be placed on a flat surface or mounted on a wall using the wall bracket provided
within 30 metres of the . It should be mounted outside of the electrical meter or fuse box, if these are made
of metal. WARNIN
G: If installed inside a metal meter box, the signal transmission distance between the
Sender Box and the Remote Monitor will be reduced.
To fix the wall bracket follow the instructions below:
Diagram
Instructions
1. Position the wall bracket.
2. Insert nail or screw through the mounting hole.
3. Hammer in nail or fix the screw halfway.
4. Attach wall bracket.
5. Slide Sender Box into place.
To Next Page
Loading...
Need help?
General