Codecs: H.263, H.263+, H.264, MPEG-4, M-JPEG
IP camera function: Yes
Interface
Power supply: 12 V ±15 % / 2 A DC or PoE
PoE: PoE 802.3af (Class 0 - 12.95 W)
LAN: 10/100BASE-TX s Auto-MDIX
Recommended cabling: Cat-5e or higher
Passive switch: NO and NC contacts, up to 30 V / 1 A AC/DC
Active switch output: 10 up to 14 V DC depending on power supply (PoE:
approx. 14 V; adaptor: same voltage as power supply), max 700 mA
RFID card reader
Optional (Part No. 9137430E)
Equipped with two relay outputs, two inputs and Wiegand interface
Supported cards 125 kHz:
EM4100, EM4102, HID Prox
Mechanical properties
Working temperature: −20 °C to 55 °C
Working relative humidity: 10 % – 95 % (non-condensing)
Storing temperature:−40 °C to 70 °C
Dimensions: (210 × 100 × 29) mm
Weight: 500 g
Covering level:
IP53 when the roof is used (see Mounting Accessories)
IP50 when the roof is not used
To Next Page
Loading...
Need help?
General
