2N IP Force 9151101CHW - Page 41

Installation manual 2N® IP Force

41 / 118
•
•
•
•
What You Need:
Plasterboard flush mounting box, Part No.
9151002
Hole: 118 x 237 mm
Flush Mounting –Hollow Bricks
What You Need:
Brick flush mounting box, Part No. 9151001
Hole: (132 x 223 x 83) mm
Suppose you intend to install your2N
®
IP Forceunit into a wall made of
hollow bricks. Note that the external side of the bricks gets damaged by
cutting and the dowels cannot practically be fixed into the thin internal part
of the bricks. Therefore, use the brick flush mounting box and follow the
instructions included therein.