2N IP Force - Page 102

2N TELEKOMUNIKACE a.s., www.2n.cz 102/117
3.
4.
Enter the telephone number using the numerical keypad and repress for
confirmation.
You can also push the button anytime to terminate a call if enabled so in the
parameter; refer to the Miscellaneous subsection.Hang up with #
Answering and Rejecting Incoming Calls
If the automatic incoming call answering function is off, signals an 2N IP Force
®
incoming call with loud ringing. Push the button to answer the call and the to
reject the call. This function is available in models equipped with a numerical keypad
only.
Door Opening (Switch Activation) by Code
2N IP Force
®
is equipped with a door lock opening switch. Enter the valid code using
your numerical keypad to activate the switch.
Procedure:
Enter the numerical switch activating code using the numerical keypad and
press for confirmation.
A successful entering of a valid code is signalled by a continuous tone indicating
unlocking (switch activation). An invalid code is signalled acoustically by
.
Profile Activation and Deactivation
Activate/deactivate a profile using the numerical keypad in order to define call routing
to the telephone directory numbers more specifically.
Procedure:
Enter the numerical profile activating/deactivating code and press for
confirmation.
A successful entering of a valid code is signalled acoustically by ( for
profile) for activation, or ( for profile) for deactivation. An invalid code
is signalled acoustically by .