2N IP Force - Page 26

2N TELEKOMUNIKACE a.s., www.2n.cz 26/117
Additional Modules
91510102N Part No.
Axis Part No. 01350-001
Additional switch with normally open/closed
contact and 12 V switched output.
Includes tamper switch.
Enables control of a secondary device, passive
time unlimited switching up to 48 V / 2 A or
active switch 12 V / 700 mA. Also includes
tamper switch to signal opening of the front
panel.
91510112N Part No.
Axis Part No. 01344-001
Includes tamper switch.
Internal RFID card reader 125 kHz for
installation in intercoms. Allows 2N IP Force
®
the use of EM4100, EM4102 and HID Proximity
cards. Another two switches, two logical inputs
and a Wiegand interface are available. It is
compatible with the two-button 2N IP Force
®
and pictogram models. It also includes a
security switch to signal when the front panel
is opened.