2N Part No. 9134174
Axis Part No. 01385-001
Mifare Classic 1k RFID fob, 13.56 MHz
Part No. 9159014EU/US/UK
2N 2Wire
®
(set of 2 adaptors and power source for EU/US
/UK)
The converter allows you to use 2N
®
2Wire
existing wiring (2 wires) from your original
door bell or door intercom to connect any IP
device. You don’t have to configure anything,
and you only need one unit at each 2N
®
2Wire
end of the cable and a power source
connected to at least one of these units.
The unit then provides PoE power 2N
®
2Wire
not only to the second converter, but also to all
other connected IP end devices.
Exit button
(suitable for Internal RFID card reader or
Security relay)
A button for connection to a logic input for
opening a door inside a building.
To Next Page
Loading...
