Internal RFID Card Reader 13.56 MHz
The (Part No. 9151031/9151017) is used for Internal RFID Card Reader 13.56 MHz
reading RFID card Ids in the 13.56 MHz band, NFC supported. This module is intended
for mounting into the model 9151101RPW, 9151101CRPW, 9151101CHRPW, 2N IP Force
®
9151102RW, 9151102CRW and 9151102CHRW. These models have an window, which is
necessary for antenna operation. If the Internal RFID Card Reader is installed, it is not
possible to install the Additional Switch.
9151031
9151017
Function:
The Internal RFID Card Reader adds two logical inputs, two additional 2N IP Force
®
switches and a tamper switch to the basic unit.2N IP Force
®
The purpose of the tamper switch is to signal any unauthorised opening of the
intercom (to prevent a theft, e.g.). It is recommended to use the tamper switch.
Tip
FAQ: Tamper switch – How to install it into the 2N IP Force
®
Specifications:
To Next Page
Loading...
