Security Relay
The (Part No. 9159010) is used for enhancing security between the 2N
®
Security Relay
intercom and the connected electric lock. The is designed for 2N IP Security Relay
®
any intercom model with firmware versions 1.15 and higher. It significantly 2N IP
enhances security of the connected electric lock as it prevents lock opening by forced
intercom tampering.
Function:
The is a device installed between an intercom (outside the secured 2N Security Relay
®
area) and the electric lock (inside the secured area). The includes a 2N Security Relay
®
relay that can only be activated if the valid opening code is received from the
intercom.
Specifications:
Passive switch: NO and NC contacts, up to 30 V / 1 A AC/DC
Switched output:
Where the security relay is fed from the intercom, 9 to 13 V DC is available on
the output depending on the power supply (PoE: 9 V; adapter: source voltage of
minus 1 V) / 400 mA DC.
Where the security relay is fed from an external power supply, 12 V / 700 mA DC
is available on the output.
Dimensions: (56 x 31 x 24) mm
Weight: 20 g
To Next Page
Loading...
