|
Classic Mini Blinds1
Extension Bracket
GETTING STARTED
Steel Tape Measure
Power Drill and
Drill Bits
Awl (or tool for
starting a screw hole)
Level
Pencil
Flathead & Phillips
Screwdriver
Included in your order is all the hardware necessary for a
normal installation. Depending on the mounting surface,
fasteners other than the screws provided may be required.
Wall board and plaster require the use of anchors such as
expansion or toggle bolts. Bricks, tile and stone need special
plugs and drill bits. Wood should always be pre-drilled to
avoid splitting.
Professional installation is also available in most areas,
call 800-800-3329.
A few simple tools are required:
MINI BLINDS
Classic
OPTIONAL HARDWARE
Spacers
STANDARD HARDWARE
Top Brackets
Hold Down Brackets
with Screws
End Brackets
(Open Position LH & RH)
Screws Valance Clip Center Support
Phillips Machine
Screws
Hex Machine
Nuts
To Next Page
Need help?
General
