|
Vertical Blinds1
GETTING STARTED
VERTICAL BLINDS
OPTIONAL HARDWARE
Plastic CornerCorner End Cap
Corner Pieces Valance Corner
(Closed)
For Vinyl Blinds
Valence Return
Fabric
Vane Weight
Outside Mount
Valance Clip
Fabric Vane Chain
A few simple tools are required:
Included in your order is all the hardware necessary for a
normal installation. Depending on the mounting surface,
fasteners other than the screws provided may be required.
Wall board and plaster require the use of anchors such as
expansion or toggle bolts. Bricks, tile and stone need special
plugs and drill bits. Wood should always be pre-drilled to
avoid splitting.
Professional installation is also available in most areas,
call 800-800-3329.
Steel Tape Measure
Power Drill and
Drill Bits
Awl (or tool for starting
a screw hole)
Level
(for outside mount)
Pencil
Flathead & Phillips
Screwdriver
STANDARD HARDWARE
Screws Inside Mount
Headrail Clip
L-Bracket
Tension Bracket
With Screws
To Next Page
Need help?
General
