3Com 3800 - Page 111

Displaying STP Settings 7-13
Sample output from the command is as follows:
3C16910:28 # sh stpd s0 po 5-8
Stpd: s0 Port: 8 PortId: 8008 Stp: ENABLED Path Cost: 4
Port State: FORWARDING Topology Change Ack: FALSE
Port Priority: 128
Designated Root: 80:00:08:00:4e:2c:13:00 Designated Cost: 0
Designated Bridge: 80:00:08:00:4e:2c:13:00
Designated Port Id: 8008
Stpd: s0 Port: 7 PortId: 8007 Stp: ENABLED Path Cost: 4
Port State: FORWARDING Topology Change Ack: FALSE
Port Priority: 128
Designated Root: 80:00:08:00:4e:2c:13:00Designated Cost: 0
Designated Bridge: 80:00:08:00:4e:2c:13:00
Designated Port Id: 8007
Stpd: s0 Port: 6 PortId: 8006 Stp: ENABLED Path Cost: 4
Port State: BLOCKING Topology Change Ack: FALSE
Port Priority: 128
Designated Root: 80:00:08:00:4e:2c:13:00Designated Cost: 0
Designated Bridge: 80:00:08:00:4e:2c:13:00
Designated Port Id: 8003
Stpd: s0 Port: 5 PortId: 8005 Stp: ENABLED Path Cost: 4
Port State: FORWARDING Topology Change Ack: FALSE
Port Priority: 128
Designated Root: 80:00:08:00:4e:2c:13:00Designated Cost: 0
Designated Bridge: 80:00:08:00:4e:2c:13:00
Designated Port Id: 8005
SW3800.BK Page 13 Tuesday, May 5, 1998 5:20 PM