3Com 3800 - Page 6

vi
2
I
NSTALLATION AND
S
ETUP
Following Safety Information 2-1
Determining the Switch 3800 Location 2-1
Configuration Rules for Ethernet 2-2
Installing the Switch 3800 2-2
Rack Mounting 2-2
Free-Standing 2-3
Stacking the Switch and Other Devices 2-4
Connecting Equipment to the Console Port 2-4
Powering-up the Switch 2-6
Checking the Installation 2-6
Power On Self-Test (POST) 2-6
Logging on for the First Time 2-6
3
A
CCESSING
T
HE
S
WITCH
Security Access Levels 3-1
User Access Level 3-1
Administrator Access Level 3-2
Default Accounts 3-2
Adding a Password to the Default admin Account 3-2
Creating a Management Account 3-3
Changing Account Passwords 3-3
Viewing Switch Accounts 3-4
Deleting a Switch Account 3-4
Methods of Managing the Switch 3800 3-4
Using the Console Interface 3-5
Using Telnet 3-5
Configuring Switch IP Parameters 3-5
Using a BOOTP Server 3-5
Manually Configuring the IP Settings 3-6
Disconnecting a Telnet Session 3-7
Disabling Telnet Access 3-8
Using SNMP 3-8
Accessing Switch Agents 3-9
Saving Configuration Changes 3-9
Supported MIBs 3-9
Supported Traps 3-9
SW3800.BK Page vi Tuesday, May 5, 1998 5:20 PM