4-24 CHAPTER 4: COMMANDS
download image <ipaddress> <filename>
{primary | secondary}
Allows you to download a new image from a TFTP
server. You must specify the IP address of the TFTP
server and the image filename. You can optionally
specify if you want the file downloaded to the primary
or secondary image. If you do not specify, the file is
downloaded to the primary image.
Table 4-19 Configuration and Image Commands (continued)
Command Description
SW3800.BK Page 24 Tuesday, May 5, 1998 5:20 PM
To Next Page
Loading...
