Need help?Do you have a question about the 3Com 3C905CX and is the answer not in the manual?
General| Manufacturer | 3Com |
|---|---|
| Model | 3C905CX |
| Category | Network Card |
| Device Type | Network adapter |
| Interface Type | PCI |
| Form Factor | Plug-in card |
| Connectivity Technology | Wired |
| Data Link Protocol | Ethernet, Fast Ethernet |
| Connector Type | RJ-45 |
| Bus Type | PCI |
| Full Duplex Support | Yes |
| Wake-on-LAN Support | Yes |
| Ports | 1 x RJ45 |
| Data Transfer Rate | 10/100 Mbps |
| Network Standard | IEEE 802.3, IEEE 802.3u |
| Driver Support | Windows, Linux |
| Compliant Standards | IEEE 802.3u |
Introduces the 3C905CX-TX-M and 3C905C-TX-M NIC models and their capabilities.
Describes the 3C905B NICs and their supported network management features.
Details the features of the 3C900B NICs, including network interface and standards.
Explains the Remote Wake-Up feature for powering on PCs remotely.
Details the MBA software for booting PCs from a server.
Describes the optional Web-based 3Com Connection Assistant for technical support.
Details the DynamicAccess LAN agent for network performance and control.
Lists the minimum hardware and system requirements for NIC installation.
Summarizes the NIC installation steps for different operating systems.
Provides step-by-step instructions for physically installing the NIC into a PCI slot.
Details how to connect the NIC to the network using different port types.
Guides installation of NIC driver and software for Windows XP, 2000, and Me.
Guides installation of NIC driver and software for Windows 95 and 98.
Guides installation of NIC driver and software for Windows NT 4.0.
Provides steps to verify the successful installation of the NIC for different OS.
Outlines the process for installing multiple NICs in Windows OS.
Covers installing the network driver for NetWare servers using the EtherCD.
Instructions for installing drivers on NetWare 4.x and 5.x servers.
Explains manual loading of the server driver for existing installations.
Lists and describes the default configuration settings for the NIC.
Outlines different methods available for configuring the NIC.
Explains how to change general NIC settings like optimization, duplex, and media type.
Explains how to use the Managed PC Boot Agent (MBA) to boot from the network.
Addresses common NIC installation problems and error messages.
Provides steps to clean up a failed NIC installation and reinstall.
Offers tips for resolving network connection issues with the NIC.
Provides steps for troubleshooting Remote Wake-Up functionality.
Details how to remove the NIC driver for various Windows operating systems.
Explains the meaning of NIC LEDs for diagnostics and troubleshooting.
Details how to run network and NIC diagnostic tests.
Shows how to view network statistics using the NIC diagnostics program.
Explains how to use the 3Com system tray icon for diagnostics.
Lists hardware, network interface, and environment specs for these NICs.
Lists hardware and network interface specs for 3C905B NICs.
Lists hardware, network interface, and standards conformance for 3C900B NICs.
Details cabling requirements, quality, distance, and standards.
Lists minimum client PC requirements for installing the DynamicAccess LAN Agent.
Provides step-by-step instructions for installing the DynamicAccess LAN Agent.
Explains how to configure the DynamicAccess LAN Agent settings.
Explains what the 3Com DMI Agent does and the information it provides.
Lists client PC and network management requirements for the DMI Agent.
Provides instructions for installing the 3Com DMI Agent.
Describes how to create installation diskettes from the EtherCD.
Lists 3Com's online support services like websites and FTP.
Advises contacting network suppliers for assistance.
Lists worldwide telephone numbers for 3Com technical support.
Explains the process for returning products for repair, including obtaining authorization.
To Next Page
