30 CHAPTER 3: INSTALLING THE SWITCH
Figure 17 Appearance of a standard front mounting ear
Figure 18 shows the appearance of a rear mounting ear.
Figure 18 Appearance of a rear mounting ear
When you install the switch into a 19-inch standard cabinet, you should select
front and rear mounting ears with a proper length (L1 in Figure 17) according to
the physical dimensions. For the selection of front and rear mounting ears, see
Table 13.
(1) Screw hole used to fix the mounting ear to the cabinet (Use one M6 screw)
(2) Screw hole used to fix the switch to the mounting ear
(1) Screw hole used to fix the mounting ear to the cabinet (Use one M6 screw)
(1)
(2)
(1)
Table 13 Selection of mounting ear for the Switch 4800G
Model
Physical dimensions
(H × W × D)
Configuration type of
front mounting ear
Configuration type of
rear mounting ear
Switch 4800G 24-Port
Switch 4800G 24-Port-DC
Switch 4800G PWR 48-Port
43.6 × 440 × 300 mm
(1.72 × 17.3 × 11.8 in.)
Standard -
Switch 4800G 48-Port 43.6 × 440 × 360 mm
(1.72 × 17.3 × 14.2 in.)
Standard Standard
Switch 4800G PWR 24-Port
Switch 4800G 24-Port SFP
43.6 × 440 × 420 mm
(1.72 × 17.3 × 16.5 in.)
Standard Standard
To Next Page
Loading...
