EasyManuals Logo

3Com Baseline 2226 Plus User Manual

3Com Baseline 2226 Plus
94 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
10 INTRODUCING THE BASELINE SWITCH
When an SFP port is in operation, the corresponding
1000BASE-T port is disabled. The 1000 Mbps
connections can only operate in full duplex mode.
Physical Features
Figure 1 shows the front and rear panels of the Switch.
The numbers in this diagram refer to numbered sections
in
“Front Panel on page 10 and “Rear Panel” on
page 13.
Figure 1 Front and Rear Panels
Front Panel
The front panel of the Switch contains a series of
indicator lights (LEDs) that help describe the state of
various networking and connection operations.
(1) RJ-45 10/100 Ports
WARNING: RJ-45 Ports. These are shielded RJ-45 data
sockets. They cannot be used as standard traditional
telephone sockets, or to connect the unit to a
traditional PBX or public telephone network. Only
connect RJ-45 data connectors, network telephony
systems, or network telephones to these sockets.
Either shielded or unshielded data cables with shielded
or unshielded jacks can be connected to these data
sockets.
AVERTISSEMENT: Points d’accès RJ-45. Ceux-ci sont
protégés par des prises de données. Ils ne peuvent pas
être utilisés comme prises de téléphone conventionnelles
standard, ni pour la connection de l’unité à un réseau
téléphonique central privé ou public. Raccorder
seulement connecteurs de données RJ-45, systèmes de
réseaux de téléphonie ou téléphones de réseaux à ces
prises.
Il est possible de raccorder des câbles protégés ou non
protégés avec des jacks protégés ou non protégés à ces
prises de données.
WARNHINWEIS: RJ-45-Porte. Diese Porte sind
geschützte Datensteckdosen. Sie dürfen weder wie
normale traditionelle Telefonsteckdosen noch für die
Verbindung der Einheit mit einem traditionellem
privatem oder öffentlichem Telefonnetzwerk gebraucht
werden. Nur RJ-45-Datenanscluße, Telefonnetzsysteme
or Netztelefone an diese Steckdosen anschließen.
Entweder geschützte oder ungeschützte Buchsen dürfen
an diese Datensteckdosen angeschlossen werden.
The Switch has 24 10/100 Mbps auto-negotiating ports.
Each port supports automatic MDI/MDI-X detection and

Table of Contents

Other manuals for 3Com Baseline 2226 Plus

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the 3Com Baseline 2226 Plus and is the answer not in the manual?

3Com Baseline 2226 Plus Specifications

General IconGeneral
Switching Capacity8.8 Gbps
Forwarding Rate6.6 Mpps
VLAN SupportYes
MAC Address Table Size8K entries
Operating Temperature0°C to 40°C
Operating Humidity10% to 90% non-condensing
Ports24 x 10/100
ManagementWeb-based
Status IndicatorsLink/Activity
Compliant StandardsIEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.1p, IEEE 802.1Q
Power SupplyInternal power supply

Related product manuals