3Com Baseline 2226 Plus - Configuring the Switch; Configuration Overview; Device Summary Information

4
CONFIGURING THE SWITCH
This chapter provides information on how to
configure the Switch’s advanced features.
Topics include:
■ Device Summary Information
■ Administration Settings
■ Configuring VLANs
■ Configuring Port Settings
■ QoS VoIP Traffic Settings
■ Security
■ Monitoring
Configuration Overview
The Switch is shipped ready for use. If you only
want the Switch to function as a basic layer 2
switch, you do not need to access the Web
interface and configure the Switch.
You only need to access the Web interface if
you want to:
■ Set the administration password to the Web
interface
■ Assign an IP address to the Switch
■ Configure the Switch’s advanced features
■ Upgrade the firmware
Device Summary Information
The Device Summary screen, which
automatically loads after you log on to the Web
interface, provides a snapshot of the Switch’s
basic settings and versions of current
components.
Click Device Summary on the menu. A screen
appears with three tabs that include:
■ Device View
■ Polling Interval