68 CHAPTER 4: CONFIGURING THE SWITCH
Figure 57 802.1X Summary Screen
Detail
Use the Detail tab to display detailed 802.1X
authentication information for a port..
Figure 58 802.1X Detail Screen
Setup
Use the Setup tab to configure the 802.1X
authenticaion settings. The following fields are
available:
■ System Authentication – Sets the global
setting for 802.1X. (Default: Disabled)
■ Operation Mode – Allows single or multiple
hosts (clients) to connect to an
802.1X-authorized port. (Options:
Single-Host, Multi-Host; Default:
Single-Host)
■ Mode – Sets the authentication mode to
one of the following options:
To Next Page
Loading...
