24 CHAPTER 3: CONNECTING TO THE WEB INTERFACE
The Discovery application can be used for
detecting and connecting to the Switch on the
network. The application will launch a Web
interface that provides the user with options to
configure, modify, and upgrade the Switch.
To use Discovery to connect to the Web
interface, do the following:
1 On a computer that is connected to the Switch,
insert the CD-ROM into its CD drive.
Discovery should start automatically. If it does
not start automatically, go to the
\Discovery
folder on the CD-ROM, and then double-click
discovery.exe.
The Welcome screen of Discovery appears.
Figure 4 Welcome Screen of Discovery
2 If the computer has multiple network adapters,
select the adapter that connects the computer
to the Switch, and then click Next.
If the computer has only one adapter, click
Next.
Discovery searches the network for 3Com
devices. When detection is complete, the Dis
-
covered Devices screen displays detected net-
work devices.
To Next Page
Loading...
