44 CHAPTER 4: CONFIGURING THE SWITCH
By default, all ports belong to VLAN 1 as an
untagged member. However, they can belong
to multiple VLANs as a tagged member. Also,
newly created VLANs will initially have no ports
associated with them.
Modify VLAN
Use the Modify VLAN screen to change the
VLAN to which a port belongs, and configure
the port to communicate with all other VLANs,
or a selected VLAN.
Figure 25 Modify VLAN Screen
1 Enter a set of VLANs or select all VLANs to
configure, then click Select.
2 From the drop down menu, select a VLAN to
modify.
3 Select a membership use. Available options for
each port include (only one option can be
associated with a single port):
■ Tagge d
■ Untagged
4 Select ports to associate with the membership,
then click Apply.
Modify Port
Use the Modify Port screen to modify the VLAN
membership of a port.
To Next Page
Loading...
