58 CHAPTER 4: CONFIGURING THE SWITCH
To create a new link aggregation group:
1 Enter a link aggregation group ID in the box
field.
2 Select the ports to add to the goup.
3 Click Apply.
Modify
Use the Modify tab reassign port members to a
link aggregation group.
Figure 44 Link Aggregation Modify Screen
To modify a link aggregation group:
1 Select the aggregation group to modify, then
click Select.
2 Select the ports to add to the goup.
3 Click Apply.
Remove
Use the Remove tab delete a link aggregation
group.
Figure 45 Link Aggregation Remove Screen
To remove a link aggregation group:
1 From the link aggregation group list, select the
aggregated group to remove.
2 Click Remove.
To Next Page
Loading...
