6-1
6 Maintenance and Troubleshooting
File Loading Failure
If file loading fails, the system runs steadily using the original system files. In this case, check whether
the physical ports are properly connected.
z If not, reconnect them correctly and restart the loading procedure.
z If so, view the loading procedure information displayed on the HyperTerminal to check for input
errors. If there is any input error, restart the loading procedure with correct input.
Common input errors include:
z Fail to set the baud rate of the HyperTerminal to 38,400 bps when loading files at a baud rate other
than 9,600 bps through XMODEM.
z Enter an incorrect IP address, software name, or path of the TFTP server when using TFTP.
z Enter an incorrect IP address, software name, username, or password when using FTP.
If file loading fails when there are neither physical connection problems nor input errors, please contact
your sales agent for help.
Password Loss
User Password Loss
If you have forgotten the user password, you can enter the Boot ROM menu:
BOOT MENU
1. Download application file to flash
2. Select application file to boot
3. Display all files in flash
4. Delete file from flash
5. Modify BootRom password
6. Enter BootRom upgrade menu
7. Skip current system configuration
8. Set BootRom password recovery
9. Set switch startup mode
0. Reboot
Enter your choice(0-9):
Enter 7, and then restart the switch. After the switch is restarted, the user password is removed.
Boot ROM Password Loss
Please contact your sales agent.
To Next Page
Loading...
Need help?
General