32 System
• APPLY - Updates the switch configuration. No changes are made to the configuration
until this button is pressed.
• CANCEL - All changes made to the page are discarded and the switch configuration
remains unchanged.
4.4 Tools
On the Tools page, you can restore the switch to default settings, upgrade the firmware of the
switch, or restart the switch.
Restore to Factory Defaults
Forces the switch to restore the original factory settings. To reset the switch, select “Reset to
Factory Defaults” from the drop-down list and click APPLY.
Upgrade Firmware
Upgrades the switch system firmware using a file provided by 3com. Select “Upgrade
Firmware” from the Tools drop-down list then click on the “Browse” button to select the
firmware file. Click the APPLY button to upgrade the selected switch firmware file. You can
download firmware files for your switch from the Support
section of the 3com web site at www.3com.com.
Upload/Download Configuration
To Next Page
Loading...
