3Com OfficeConnect 3CDSG8 - System Reboot Command

CLI Reference Guide 79
This command has no default configuration.
User Guidelines
The system does not prompt for confirmation of the request. The switch is not
rebooted.
Example
The following displays the list presented for the system restore default command:
System>restore default
*** Restoring to default configuration...
*** Restored to default configuration...
*** Activating new configuration...
System>
System Reboot
The System Reboot command simulates a power cycle of the device
Syntax
[System] reboot
Default Configuration
This command has no default configuration.
User Guidelines
The system does not prompt for confirmation of the request.
Example
The following displays the list presented for the system reboot command:
System>reboot
System>
Booting ...image 1
SRAM testing: Passed
S/W Version: occ01_00_00
H/W Version: R01
serial number0001
Default IP address: 169.254.17.16
**Bootup finish**
Username: