3D Systems iSense User Manual

3D Systems, Inc.
9
• Enhance tools
▪ To automatically enhance brightness, contrast, and clarity in your scan, tap Auto Enhance.
▪ To remove unwanted areas, tap the Trim tool and drag your nger to draw a line that denes the area you want to slice away.
The tool always removes the smaller of the two pieces and deletes the smaller mass. Tap Trim again to turn off the tool.
▪ To improve the look of the scan, tap Touch Up, and drag your nger over the area you want to improve. Tap Touch Up again to
turn off the tool.
• Share tools
▪ To save your scan to your iPad, tap Save. You can save the scan as an STL, PLY, or OBJ le format; the formats will work in
any 3D modeling software.
▪ To access your saved scan le and transfer it to your computer:
a. Connect the iPad to your computer.
b. Open iTunes.
c. Click the Apps tab, and then select iSense.
d. Under iSense Documents, select the le, and then click Save to.
e. Select a folder on your computer where you want the le to be located.
▪ You can upload your scan in order to share and cloud print on Cubify.com:
a. Tap Upload.
b. Log in to your Cubify account.
If you don’t already have an account, tap SIgnup, at the top of the screen, and complete the registration process.
c. After your account has been authorized, enter a Name for the le, and an optional Description.
d. Click OK.
A message is displayed, informing you that your model was uploaded successfully.
e. Click OK.
▪ The design will be put on your Shelf, which is your personal gallery for organizing your designs. You can specify whether your
Shelf is public or private. You can also specify the privacy settings on a per-design basis.
Help menu
The Help menu provides the following options:
• About - shows information about the iSense scanner and software.
• Acknowledgments - displays information about copyrights and contributor acknowledgments.
• Controls - shows the navigation gestures screen.
• Device Info - lists information about the battery, serial number, rmware revision, and hardware revision for your iPad.
• Tutorial - shows on-screen tips for each step of the scanning process.
• User Guide - displays a PDF of the iSense User Guide.

3D Systems iSense Specifications

General

Scanner type	Portable scanner
Product color	Black
Color scanning	Yes
Scanning method	Non-contact active
Scan volume (max)	3000 x 3000 x 3000 mm
Scan volume (min)	200 x 200 x 200 mm
Maximum frame rate	30 fps
Compatible products	iPhone 6
Scan modes supported	3D portrait mode, Object mode
Vertical field of view	45 °
Horizontal field of view	58 °
Battery life	4 h
Standby time	1000 h
Power source type	Battery
Mobile operating systems supported	iOS 7.0, iOS 8.0, iOS 9.0
Operating temperature (T-T)	0 - 35 °C

Weight and Dimensions

Depth	27.9 mm
Width	119.2 mm
Height	29 mm
Weight	99.2 g