Need help?Do you have a question about the 3D Systems ProJet 3510 CPX and is the answer not in the manual?
General| Build Volume | 298 x 185 x 203 mm |
|---|---|
| Layer Thickness | 32 μm (0.0012 in) |
| Technology | MultiJet Printing (MJP) |
| Print Speed | Up to 25 mm/hour |
| Connectivity | Ethernet |
| Materials | VisiJet materials |
Explanation of warning symbols used in the manual.
Essential rules for safe printer operation and handling.
Precautions regarding electrical hazards and connections.
Warnings about UV radiation exposure from the printer.
Procedures for safe and compliant disposal of materials.
Information on potential skin/eye irritation and chemical exposure.
Guidelines for safely handling materials and using PPE.
Procedures for handling and removing waste materials.
Procedure for loading support and part material cartridges.
Safe procedures for powering off the printer.
Solutions for network and communication issues.
Troubleshooting for printhead cleaning system faults.
Diagnosing issues related to material identification and quality.
Resolving errors related to printer movement and sensors.
Addressing problems with the UV curing system.
Solutions for faults in the vacuum system.
To Next Page