Need help?Do you have a question about the 3D Systems ProJet 2500 and is the answer not in the manual?
General| Technology | MultiJet Printing (MJP) |
|---|---|
| Layer Thickness (inches) | 0.0013 in |
| Layer Thickness | 32 μm |
| Materials | VisiJet materials |
| Connectivity | Ethernet |
| Weight (lbs) | 330 |
| Resolution (X, Y, Z) | 800 x 900 x 790 DPI |
| Power Requirements | 100-240 VAC, 50/60 Hz |
| Operating Temperature | 18 - 28 °C |
| Operating Humidity | 30 - 70% RH |
Explains safety symbols and their meanings, including hazards and precautions.
General safety rules and guidelines for operating the 3D printer system.
Warns about high voltage electricity and potential electrical shock hazards.
Details UV radiation hazards and precautions to prevent eye injury.
Information on potential hazards of part materials and handling precautions.
Information on chemical hazards, irritant effects, and skin/eye contact precautions.
Details irritant properties of uncured material and precautions for skin contact.
Information on hazards related to inhaling or ingesting uncured part material.
Procedures for handling materials, including emergency contacts and packaging.
Information on material flammability, combustibility, and ignition sources.
Specifies personal protection equipment (PPE) like gloves and safety glasses.
Procedures for cleaning up material spills and handling contaminated items.
Guidelines for safe removal and disposal of waste material from the printer.
Comprehensive chemical safety precautions, including PPE and ventilation.
Emphasizes wearing protective gear and avoiding skin contact with materials.
Defines major spills and required PPE for cleanup personnel.
General first aid procedures and protective equipment recommendations for material exposure.
First aid for skin contact with material, including washing and clothing removal.
First aid for eye contact with material, including flushing and medical attention.
First aid procedures for fume inhalation of materials.
Explains the function of safety interlocks and how they protect users.
Describes safety interlock switches that prevent UV exposure.
Details how door interlocks prevent access during operation and shut down the system.
Warns about radiation hazards from the print applicator if interlocks are defeated.
Step-by-step instructions for printing a part.
Detailed steps on how to import and prepare a file for printing.
Detailed steps for post-processing printed parts.
Procedure for inspecting the planarizer.
Steps for cleaning the planarizer blade.
Routine for inspecting the planarizer blade for wear or damage.
Steps to inspect and clean the housing of the planarizer.
Instructions for replacing the particulate carbon filter.
Details how to calculate and input shrink compensation values.
Procedures for removing and installing material cartridges.
Instructions for completing the material changeover process.
Steps to take in case of a power outage and how the printer recovers.
To Next Page