Need help?Do you have a question about the 3D Systems CubePro 3D Printer and is the answer not in the manual?
General| Connectivity | USB, Wi-Fi |
|---|---|
| Number of Print Heads | 3 |
| Filament Diameter | 1.75 mm |
| Software | CubePro Software |
| Display | Color Touchscreen |
| Power Requirements | 100 - 240 V AC |
| Materials | ABS, PLA |
Explains safety symbols and their meanings for hazard identification.
Provides essential rules and precautions for safe operation of the printer.
Step-by-step instructions for preparing and executing a print job.
Guides on how to safely remove a printed object from the print pad.
Setting for print detail and surface smoothness.
Controls the internal structure and robustness of the printed part.
Detailed steps for applying Cube Glue to the print pad for adhesion.
Procedure to level the print pad relative to the print jets.
Steps to print and analyze calibration files for Z-Gap and pad level.
Process for adjusting the Z-Gap distance between print jets and the pad.
How to interpret calibration prints to identify misalignment.
Detailed steps for calibrating the alignment of print jets.
Steps to input temperature calibration values for new extruders.
Explains codes related to issues with filament movement and extrusion.
Explains codes related to incorrect temperature readings or changes.
Information on how to contact Cubify Support for assistance.
Questions and steps for troubleshooting cartridge-related problems.
Questions and steps for troubleshooting temperature-related issues.
Questions and steps for troubleshooting filament flow issues.
To Next Page