Need help?Do you have a question about the 3D Systems CubePro and is the answer not in the manual?
General| Product color | Black, White |
|---|---|
| Viewing window | Yes |
| Maximum extruder tip temperature | 280 °C |
| Input current | 6 A |
| AC input voltage | 100-240 V |
| AC input frequency | 50 - 60 Hz |
| Print technology | Plastic Jet Printing (PJP) |
| Printing material | ABS, Polylactic acid (PLA) |
| Layer thickness (max) | 0.3 mm |
| Layer thickness (min) | 0.07 mm |
| Layer thickness supported | 0.2, 0.3 mm |
| Number of printing colors | 3 |
| Maximum build size (WxDxH) | - mm |
| Vertical print speed (max) | 54000 mm/h |
| Minimum RAM | 2 GB |
| Minimum processor speed | 2 GHz |
| Mac operating systems supported | Mac OS X 10.9 Mavericks |
| Windows operating systems supported | Windows 7 Enterprise, Windows 7 Enterprise x64, Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 8, Windows 8 Enterprise, Windows 8 Enterprise x64, Windows 8 Pro, Windows 8 Pro x64, Windows 8 x64, Windows 8.1, Windows 8.1 Enterprise, Windows 8.1 Enterprise x64, Windows 8.1 Pro, Windows 8.1 Pro x64, Windows 8.1 x64 |
| Minimum display resolution requirement | 1024 x 768 pixels |
| Ethernet LAN | - |
| Accuracy | 1 % |
Weight and Dimensions| Depth | 581 mm |
|---|---|
| Width | 566 mm |
| Height | 606 mm |
| Weight | 41000 g |
Procedure for verifying and adjusting the Z-Gap for optimal printing.
Instructions on achieving the correct closed Z-Gap based on print patterns.
Criteria for identifying a correctly leveled print pad based on calibration lines.
Troubleshooting steps for correcting an incorrectly leveled print pad.
Step-by-step guide on how to select and start a print job.
Instructions for safely removing printed parts from the print pad.
Steps for downloading and installing the CubePro software on Windows.
Instructions for downloading and installing the CubePro software on Mac.
Overview of the main interface and functions available on the Home tab.
Tools for managing and manipulating CAD files within the software.
Settings to define printer type, number of jets, and material types.
Customization options for print quality, resolution, strength, and pattern.
Advanced options for customizing fill spacing, shell, and support borders.
Guide on preparing models and initiating the printing process.
Options for scaling, rotating, and positioning 3D models.
Instructions for applying Cube Glue to the print pad for adhesion.
Steps for removing and installing material cartridges.
Overview of the leveled print pad and proper Z-Gap illustration.
Procedure for printing the calibration file to check print pad leveling.
How to read and interpret the scale printed during offset jet calibration.
Step-by-step guide for calibrating the offset between print jets.
To Next Page