3D Systems CubePro - CubePro Software Overview; Home Tab

393D Systems, Inc.
CUBEPRO SOFTWARE OVERVIEW
CubePro software enables the user to import .stl creation les, specify the material type and color, and then orient, scale, size and
rotate the models. Before the printer can print a le, the software must slice it into layers during the build process. This process converts
a .stl le to a .cubepro le which is the le type the printer can print. Once a .cubepro le has been generated, this print le can no
longer be edited although the original .stl le can be used again to create another .cubepro le.
STL Files: Files that can be imported and edited prior to building a .cubepro le.
CUBEPRO Files: Files that have been prepared, sliced into layers, and are ready to print.
NOTE: The CubePro software interface for Mac may differ in color from the Windows version but the functionality will be
the same.
HOME TAB
A
Interface Tabs
B
Tool Ribbon
C
Model Size and Position
D
Print Material Conguration
E
Stage
A B
C
D
E