193D Systems, Inc.
SYSTEM
Select Language
SELECT LANGUAGE allows the user to localize the printer to their language.
Light
LIGHT allows the user to turn on or off the print jet LEDs. The other interior LEDs
are managed by the rmware when the CubePro is powered on.
ADVANCED
Firmware
Selecting the FIRMWARE icon allows the user to update their rmware either with a
le downloaded to a USB mass storage device or by wireless connection.
INFO
By selecting INFO, the printer will display the printer status including the serial
number, the print jet temperatures, and the name of the wireless network to which
the printer is connected.
NETWORK
The Network menu allows the user to connect to a wireless network or to an ad hoc
device.
PRINT JET CALIBRATION
The print jets in the CubePro are calibrated from the factory and should not need to
be recalibrated.
The Print Jet Calibration menu is included in the menu for service professionals to
correct print quality issues.
CAUTION: Do not change any of the values in the Print Jet
Calibration menu unless advised to do so by Cubify Support. Any
changes will alter the print quality of your creations.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
