3D Systems CubePro - Updating the CubePro Firmware; Updating Firmware Using USB

773D Systems, Inc.
UPDATING THE CUBEPRO FIRMWARE
The CubePro rmware can either be updated via wireless connection or by using a USB mass storage device. When using a USB
mass storage device to update the rmware, log into your www.Cubify.com account and download the latest rmware to your device.
Updating Firmware Using USB
1. Select SETUP.
2. Navigate to the Advanced screen and select FIRMWARE.
3. Select USB KEY.
4. Insert the USB mass storage device into the USB port and select the
checkmark.