493D Systems, Inc.
PREPARING AND PRINTING A CREATION
WARNING: THE PRINT JETS BECOME EXTREMELY HOT DURING SETUP AND OPERATION. DO NOT TOUCH THE
PRINT JETS.
CAUTION: Do not change the material cartridge color or material type during printing. Doing so may damage the
printer.
The CubePro software client includes useful tools to place a creation in the optimum position for printing. The model can be moved or
rotated using the mouse.
Pan/Zoom: Rotate the mouse wheel in either direction
Rotate the Stage: Left-click and drag the mouse to change the view of the model
Move the Stage: Right-click and drag the mouse to move the stage.
1. Select Open Model.
NOTE: Select Open Model Assembly if there are multiple parts in
the model.
2. Browse to the creation le and select Open.
NOTE: The creation or assembly will appear on the stage.
NOTE: You can open multiple creations on the same stage.
NOTE: To open .cubepro les, select Open from the Print File
menu, browse to the creation le and select Open.
3. If your creation requires a single color, select the Single Color checkbox from
the Home tab.
To Next Page
Loading...
