Need help?Do you have a question about the 3D Systems CubeX and is the answer not in the manual?
General| Printing colors | White |
|---|---|
| Print technology | - |
| Printing material | ABS, Polylactic acid (PLA) |
| Maximum build speed | 15 mm³/s |
| Layer thickness (max) | 0.100 mm |
| Layer thickness (min) | - mm |
| Number of print heads | 1 |
| Maximum build size (WxDxH) | 275 x 265 x 240 mm |
| Product color | Gray |
| Viewing window | Yes |
| Maximum extruder tip temperature | 280 °C |
| Ethernet LAN | No |
| AC input voltage | 110-240 V |
Weight and Dimensions| Width | 515 mm |
|---|---|
| Height | 598 mm |
| Weight | 36000 g |
Lists the necessary tools and parts for print tip replacement.
Steps to safely detach the old print tip from the printer.
Steps to correctly attach and connect the new print tip.
Procedure to calibrate print tips for optimal bed adhesion and print quality.
Instructions for configuring print tip offsets for proper printer function.
Procedure for securing the print tip, especially for single-jet configurations.
To Next Page